I know it’s been a while since I posted an update to show any progress on my ongoing O gauge project.
The layout – Prince’s Street – even has an exhibition booking for the latter half of 2020 so I am very mindful of the need to make steady progress in many areas.
In recent weeks I have focused on the electrical side of the layout, something which needs to be right but I have to admit I prefer to do other things such as the scenic side of the layout. Despite that, progress ahs been made with a lot of different things including an 8 ft traverser which will be needed too.
I thought I’d show you a few pics to highlight some of the progress.
I purchsased this little hut as a little diorama. It also came with a grounded wagon body on a little scenic board. I really thought it had a lot of potential and was something different. It has now been fixed in place and ground cover added to avoid seeing the bottom of the building. The earth colour will have some further work done to it as I’m not 100% happy with it.
Some more ground cover has been added around the front of the layout near to where the coal depot will be. I really want it to look uneven and unkempt so I’m doing my best not to make it look planned. As already mentioned, the track will get some more weathering and then I will add some more grass between the sleepers.
I’ve now made the coal staithes from single wooden sleepers glued together. These need to be painted and weathered, then I will started to make the ground in this area look dirty with puddles, mud and piles of coal.
The platform was painted but every now and again it got a little bit of other colours on it so I repained the whole thing including the brick sides and painted fresh stripes on it. It’s a very clean platform and the edges will eventually be weathered with the airbrush to refelct years of grime from diesels and the steam engines before that. The station also needs signage and lamps and people and platform clutter.
I’ve really enjoyed putting the grass and ground cover materials on this little area at the front of the layout. The static grass fibers are a mix of colours and lengths with the longest being 6mm by Woodland Scenics. There are also some Noch plants in the grass although these have been used sparingly due to their cost!
The station area still needs some more work but once I start it should move forward quite quickly. The canopies need a little bit more work but are nearly finished. The station building is also nearly finished and needs its roof to be covered in hand applied slates. I haven’t yet decided how the front of the station will look as I would like vehicles to be able to drive into the railway yard. The end also needs some low relief buildings to make it look like it is part of a small town. The rear wall also needs detail above that. I hope to try and give the representation of some buildings with a wooden fence at the top of the stone walls. The wooden fence made from coffee sticks from Costa and the like! Thanks Costa!
As you can see, the control panel has also been started and uses the shell of a previousl control panel with a freshly cut top section. This panel is designed so it can be hung from the front when the layout is at home and the rear side when the layout is at an exhibition. I guess you could operate it at an exhibition from the front if you wanted. To do this I have had to make sure the wiring looms are long enough to reach both sides
Here’s another shot of the line side hut showing the ground cover around the base of the building. I will probably add some more old sleepers and lineside junk.
SO, Here’s a picture of the whole scenic area at the moment. There’s still lots to do but when the area is tidy, I do feel it’s going in the right direction. I hope you like it too!
Leave a comment and let me know what you think. Come back soon.